How do you clean a tile insert floor drain?

Floor drains are a vital part of any bathroom or kitchen. It is always in use, and a lot of debris, particulate, hair, or other small substances can gather in it. A tile insert drain is a stylish kind of floor drain that merges itself with the flooring or tiles.

At first glance, cleaning might feel like a lengthy and hard job, but this is not true. This blog post walks you through its cleaning process and more. Please read on!

Supplies and tools

The first step in any household job is to gather the necessary tools and materials in one place so that you don’t waste time and energy during the process.

Similarly, to clean a tile insert floor drain, you will need some of the following tools and materials:

  • Sturdy pair of gloves.
  • A scrubbing brush or tool to dislodge stubborn debris.’
  • A mild cleaning solution suitable for use on tile and grout.
  • A bucket or basin for rinsing.
  • A towel or mop for drying the area afterward.
  • Drain removing tools.

The cleaning of the tile insert floor drain.

We have divided the cleaning process into digestible and easily doable small steps. The following paragraphs walk you through the process for a complete DIY job.

Area prep

Safety comes first, so start removing unnecessary items or materials to make the drain m, more accessible. Also, ensure that the floor is not wet and you are wearing proper shoes that don’t slip.

If the drain is in a bathroom, lay down towels or old clothes to catch spillage while cleaning. Also, keep the space well-ventilated to avoid cleaning solution fumes.

Remove the drain cover

This step is delicate, so tread with care. Also, ensure that while removing the tile insert, you are following the manufacturer’s instructions.

The tile insert must be carefully removed from the floor drain to avoid damage. Find any screws or bolts keeping the insert in place and carefully remove them using the right tools.

Remove the screws and carefully raise the insert from the drain, being careful not to force it or damage the tile or grout.

Clean the tile insert

This is the purpose of our whole marathon. So, take all the time you need to clean and do a job well done.

  • The floor drain detritus must be cleaned after removing the tile insert.
  • Remove visible material, including hair, soap scum, and dirt, with a tiny handheld brush or tool.
  • To clean the drain thoroughly, start at the outside and work your way in.
  • Tweezers or needle-nose pliers can remove tough dirt from deeper drains.
  • Continue to the next step to clean the drain fully after clearing visible debris.

Time for the cleaning solution

Cleaning the tile insert floor drain requires the correct solution to remove debris, filth, and bacteria. So, use a moderate, non-abrasive tile and grout cleaner to avoid damage.

A specialist drain cleaner or enzymatic cleanser can break down organic materials and eradicate odors. At this point, you need to dilute the cleaning solution per the manufacturer’s directions before use for maximum efficacy.

Lastly, spread the combined solution generously on the drain and let it penetrate for a few minutes before scrubbing.

Pour hot water into the drain

The next thing you need to do is pour hot water into the drain so that everything is clean. Also, this step will ensure that any remaining debris or particulates go out the drain.

Other method

Here’s a simple tip to keep your drain clean and prevent mold and soap scum buildup:

  • Flush it with vinegar, hot water, and baking soda every four to six weeks.
  • Combine 1 cup of baking soda with half a liter of hot water and pour it into the floor trash.
  • Allow ten minutes for soaking.
  • Just add one more cup of baking soda, mix it with a cup of vinegar, and then wait for about 10 minutes.
  • Once the fizzing subsides, rinse it with hot water.

Scrubbing and Disinfecting

Once you’ve thoroughly cleaned and disinfected the tile insert drain, make sure to rinse off any leftover residue and moisture to avoid mold or mildew.

Also, rinse the drain and surrounding area with clean water to remove all traces of the cleaning solution.

It is also a good practice to focus on corners and gaps where residue can build up.

After rinsing, dry the drain and surrounding floor completely with a clean towel or mop.

To avoid any moisture-related problems, ensure that everything is completely dry.

Re-insert the tile floor drain

Since the process is complete, it is time to put everything back in place. Please ensure that you are placing the drain correctly. Also, if there are screws or ad-ons, please tighten them correctly.

An ideal method would be to follow the manufacturer’s guidelines.

Some Do and Don’t during the cleaning process.

Do the following

  • Make sure your cleaning product is compatible with tiles, stainless steel, grout, and concrete. Using the wrong cleaner could result in damage to your drain or tile.
  • When your drain is severely blocked, it’s best to seek help from a professional plumber.
  • Opt for a soft cloth instead of something abrasive, such as steel wool.

Don’t do the following

  • Avoid using sharp objects or cleaning liquids that may harm the drain or surrounding tiles, grout, or concrete.
  • Avoid using harsh cleaners or metal scrapers that may harm the stainless steel or adjacent tiles.

Conclusion

Cleaning a tile insert drain is a pretty straightforward and simple process. Also, the process can vary according to the product. Since not all floor drains have the same functionality and design so, the steps may vary and you may need to be creative.

However, please stop the cleaning process if there is a chance of damage to the product. Try calling the manufacturer or consult with the guidelines.

Finally, YZ drain is a popular supplier of modern and trendy drain systems. Our products are durable, long-lasting, and affordable. You can explore and purchase the products using the online store. Thank you for Reading!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Get in Touch
Please enable JavaScript in your browser to complete this form.

CONACT US

Please enable JavaScript in your browser to complete this form.