How to install a 60-inch linear drain in the shower

This step-by-step guide will allow you to install a 60-inch linear drain in your shower. It is a complete guide that includes everything from start to finish. The primary steps include marking the area, preparing the floor, checking the slope, cutting the opening, installing the linear shower drain, and sealing it professionally. Please read on to learn in detail.

Introduction

YZdrain is a well-known global brand that supplies premium quality shower installation products, including linear shower drains. When removing a 60-inch linear shower drain, follow precise instructions to avoid product or floor damage. Read on to learn more!

Tools and materials you will need

• Tape Measure.
• Pencil or Marker.
• Level.
• Spirit Level.
• Power Saw or Angle Grinder.
• Screwdriver or Drill.
• Trowel.
• Pipe Wrench or Adjustable Wrench.
• Bucket.
• Sponge or Cloth.
• Utility Knife.
• 60-Inch Linear Shower Drain Kit.
• Waterproofing Membrane.
• Mortar or Adhesive.
• Tiles or Flooring Material.
• Grout.
• Silicone Sealant.
• Fasteners.
• PVC Pipe and Fittings.
• Sealant for Edges.
• Safety Glasses and Gloves.

Step 1: Measure and Mark the Installation Area

Determine the best position for the 60-inch linear drain and mark the installation area. Water drainage depends on edge alignment; therefore, mark them accurately.

A flawless installation begins with this step, positioning the linear drain precisely to improve shower operation and aesthetics.

Step 2: Prepare the Shower Floor

Clean and level the shower floor to remove debris and imperfections. This crucial step provides a solid base for the 60-inch linear drain.

A smooth and level shower floor stabilizes the drain and assures its secure and even placement, optimizing water flow and drainage.

Step 3: Verify the Slope

Check the shower floor slope to ensure water flows to the drain. The slope must be correct for efficient drainage, stagnant water prevention, and a dry, safe shower. This step optimizes the 60-inch linear drain and creates a well-designed shower space by directing water naturally down the drain.

Step 4: Cut an Opening for the Drain Channel

Cut a trench or opening in the shower floor for the drain channel using appropriate equipment. This precise step is essential for 60-inch linear drain channel compatibility.

So, carefully constructing the aperture ensures flawless drain channel integration into the shower floor, ensuring a secure and well-fitted installation.

Step 5: Install the Drain Channel

Be cautious about fitting the drain channel firmly into the opening. Follow the manufacturer’s directions for your 60-inch linear drain model. A secure and aligned installation requires this step.

Proper positioning ensures water flows smoothly into the drain canal. Following the manufacturer’s instructions assures proper installation, which improves shower linear drain efficiency and lifetime.

Step 6: Connect the Drain Outlet

A robust, waterproof connection should be made between the linear drain outlet and the plumbing system. It prevents leaks and optimizes 60-inch linear drain drainage.

Water is removed efficiently by connecting the drain outlet to the plumbing system, keeping the shower dry and safe. Careful and precise linear drain installation improves its functioning and reliability, decreasing shower water concerns.

Step 7: Secure the Drain Channel

Use manufacturer-recommended fasteners or adhesive to secure the linear drain channel. It will ensure stability throughout usage, eliminating shifts or motions that could harm the 60-inch linear drain.

Also, following product instructions assures adequate securing mechanism application, ensuring long-term installation durability.

Step 8: Waterproofing the Installation

Apply a waterproofing membrane around the linear drain and surrounding locations. A membrane prevents water seepage and protects the shower construction.

The waterproofing membrane keeps moisture in the drain region, preventing water damage and extending the life of the 60-inch linear drain installation.

Step 9: Tile or Finish the Shower Floor

You can tile or finish the shower floor around the linear drain for a seamless look. To unify the shower space, tiles or the finishing material are applied.

Attention to detail during this step makes the linear drain an integrated and complementary part of the design. The finished floor enhances your shower’s appearance and completes the installation, matching your style preferences.

Step 10: Check for Proper Alignment

Ensure the linear drain is level and aligned – avoiding water collecting and unequal drainage; this crucial step maintains optimal operation.

Adjust as needed to ensure the linear drain matches the shower floor. The 60-inch linear shower drain performs better and lasts longer when aligned.

Step 11: Test the Drainage System

Run water through the shower to test the drainage system for problems.

Be vigilant for leaks and water flow difficulties and fix them immediately. Testing the drainage system at this stage lets you spot and fix issues before they worsen, ensuring a reliable and effective shower drainage system.

Step 12: Apply Sealant

Treat the linear drain and tiles with an appropriate sealant to waterproof and strengthen the linear drain and tiles.

The sealant keeps water out and protects the 60-inch linear drain. A careful sealant application creates a durable seal, strengthening your shower system.

Conclusion

Following the steps above sequentially and perfectly will give you an excellent functioning 60-inch linear shower drain. If you have any questions or concerns, please feel free to comment below. Thanks for the Read!

FAQs