The accumulation of hair, soap scum, and other debris in your shower drain may lead to sluggish drainage or even a blockage if left unchecked. The simplest solution is to remove the linear shower drain cover and clean the channel or outlet below. Here are the most common kinds of shower drains and some ways to unclog them to make your job simpler.
Everybody has to deal with house maintenance now and again, and today, we’ll remove the cover off a Kohler linear shower drain. If you need to clean it up or see what’s beneath it, this guide will show you how to do so securely and quickly.
Things You Need
Screwdriver (flathead)
Drain removal tool for your drain model
Clean pair of gloves
Cleaning products
Face masks
Goggles (optional if using acid-based products)
Flashlight
Paper towel
Garbage bags
Steps to Remove Kohler Linear Shower Drain
Step 1: Preparing the Area
You should wait until the shower is dry before beginning. Keeping everything dry simplifies everything, and it’s also better for safety reasons. Spread out some paper towels to collect any water or debris that may fall down the drain.
Step 2: Finding the Drain Cover
Sleek and modern Kohler linear shower drains may be difficult to conceal—particularly if the floor color matches the drain. Here is where you may need to use your flashlight.
Coming up next is the big show. Carefully use a flat-head screwdriver to remove any exposed screws from your Kohler linear shower drain. Sequester these screws; you may need them at a later time. If you can’t see any screws, it’s probably a snap-in drain cover.
Put the flat end of a screwdriver or the edge of a drain removal tool beneath one end of the cover for snap-in types. Using little yet strong pressure, push upwards. The cover should begin to give some. Gently glide your hand along the cover. You must use caution to avoid harming the cover or the linear shower drain.
Step 4: Checking and Cleaning Up
After removing the cover, the next step is to examine it. Look for obstructions or other problems by shining a flashlight down the drain. After that, wipe the lid. The majority of the material will consist of hair or soap scum, which may be easily removed with a thorough rinsing and maybe some light elbow grease. A gentle cleanser will do the trick for more stubborn dirt and filth.
Step 5: Inspecting the Drain Directly
Take a look down the linear shower drain. The moment to remove any obvious accumulation is now. A tiny drain snake or a twisted wire hanger may prevent obstructions. Take care not to damage the drain’s inside by scratching it.
Step 6: Cover Replacement
When you’re sure everything is clear, put the lid back on. Make sure you don’t overtighten the screws if your cover has any, and then line it up properly. Simply line up the cover and push it hard to return it to its snap-in position. It ought to click in, either audibly or visibly.
Bottom Line
And that concludes it! Changing out the cover for a linear shower drain from Kohler isn’t as difficult as it first seems. Cleaning and lubricating your shower regularly like this maintains it in pristine condition. Keep in mind that you should call a professional if you have any serious plumbing problems while you are working on this. Make your fun!
FAQs
What is a linear shower drain?
A long and thin drain with a rectangular form is called a linear shower drain. Locations such as the entry, the wall, or the middle of the shower floor are suitable for its installation. A linear drain directs water to a channel or trough under the floor when installed in a shower.
How does a shower drain cover work?
Sitting flush with the shower floor, the drain strainer—often a cover made of metal or plastic—allows water to flow through while capturing debris to avoid blockages. Connected to the filter, the drainpipe directs the water’s flow away.
Can you take out the linear shower drain?
You may remove the debris basket from a high-quality linear drain. Clogged pipes are one of the most common and noticeable issues in every house, but this may be avoided. Take the right screwdriver and unscrew it to remove it. The toe-touch linear shower drain gets its name because all it takes to open and shut them is a toe tap. In most cases, you may unscrew the drain while it’s in the open position and then remove the cover to remove this kind of drain.
What is the process for removing a drain cover?
Go ahead and open the linear shower drain. To check for a set screw below the drain stopper, unscrew the knob located on top of it. To remove a drain stopper that is fastened with a set screw, you may use a little screwdriver or a hex key. The stopper must be turned counterclockwise until it comes loose from its mounting post.
Is it difficult to clean linear shower drains?
A common gripe about linear shower drains is that, despite their attractive design, they are more of a pain to clean. They collect more dirt than regular drains and might be difficult to clean since they are flush with the floor or wall.
What materials for linear drain showers are available?
These linear shower drain covers have various finishes and materials such as polished brass, chrome, stainless steel, oil-rubbed bronze, and antique brass.
How do I choose a linear shower drain?
When selecting a linear drain, it is important to think about the tasks needed. These tasks will dictate its placement and the method of installation. Floor to ceiling – A linear drain that extends from wall to wall follows the room’s dimensions.
What is a drain cover called?
They are also called maintenance hole covers or manhole covers.
MORE:
