National Shower Drain Product Quality Assurance Testing
The shower drain is a key part of the link between the floor and the sewage pipes. Its performance has a direct impact on the shower environment and sewage system. It’s not just about installing a new shower drain. It must be tested to ensure it works and is watertight so no water or waste can get out. Shower drain quality testing may detect drainage system problems. It may not always be difficult to identify if there is an issue with your shower drains. You can find it quickly and start fixing it right away. Also, you may not be able to identify a drainage issue with signs. You might simply want to examine your drains for leaks or other potential problems. So you can take care of them quickly and escape high costs and a lot of stress later.
Shower drain testing is a fast way to check for pipe leaks before they get into the foundation. This type of leak is one of the most expensive problems a property may experience if it goes unchecked. Because wet ground can cause problems with the supports and could cause the building to sink. The shower drains quality assurance testing may reveal blocked and leaking pipes. You can test your shower drains in a variety of methods. In this article, we discussed the national shower drain quality assurance testing methods. These tests can help you in a variety of ways. Let’s start!
National Shower Drain Quality Assurance Testing Method
1-Corrosion Resistance
The word “drain technology” refers to shower drains that are made for particular uses. It’s important to think about which drain material will work best for the type of wastewater. Chemicals and their amounts in wastewater environmental conditions are all taken into account. Also, you need to consider the floor designs and the types of waterproofing covers. You could do a corrosion resistance test to find out which material is best at dealing with shower water. Here is the list of the most common materials used in shower drains.
The properties of standard materials
Most shower drains are made of plastics or metals like stainless steel or grey iron. The materials are appropriate for many applications due to their individual properties:
Stainless steel
This Stainless steel is a germ-resistant material. So, it’s a good option for places where germs and bugs are common. This works well in breweries, restaurants, hospitals, and swimming pools. The material provides good corrosion resistance.
Polymer (like PE-HD, PP, PVC)
This drain material is easy to install and is corrosion resistant to acid wastewater. This material works well for everyday uses, such as drains in homes and restaurants.
Grey iron
This material doesn’t catch fire or get too hot, so it’s great for use in solariums and on bitumen-coated roofs. This material provides corrosion resistance and hygiene limits.
2- Load Capacity
You never choose a shower drain without first checking its load capacity. It is important that the drain can handle the expected amount of water. It’s important to know how many gallons per minute (GPM) your shower drain can handle. While the majority of regular showers don’t need high drain load capacities. But it’s a must-have in big baths with more than one shower head. However, the drain pipe and drain must be large enough to handle GPM flow. The pipe and strainer must be big enough to handle the estimated amount of water.
The shower linear drain system can have several drain outlets to increase the flow rate. It provides the wall-to-wall coverage needed for good draining. Your shower drain must be able to handle more water than it produces by the shower. The average shower uses 10-16 liters per minute, depending on the water heater or boiler. But, many shower drains are able to drain at least 30 liters per minute. This means that an average shower has enough drainage load capacity. If you use more than one shower head or a rain shower. You should ensure the shower drain can handle the load.
3-Pressure Resistance
Pressure resistance testing is used to find water leaks in drainage systems. This test is important because water leaking from damaged drains can harm buildings. It caused many major problems. It may eventually reduce the ground’s ability to support weight. The way a sewage system is set up is different for every home or business office because each one has its own needs. Pressure resistance testing helps experts to find and fix pipe problems.
There are two common ways to test a drain: with air and with water. The smoke test and the tube test are two other ways. The tests go through a set of tests to ensure they meet national standards. This is important because every part of a plumbing system is needed to keep water running. Many drain pressure resistance tests can reveal leaks in a new system. Pressure resistance testing is necessary to ensure the work meets US national standards.
4- Sealing Property
This sealing property test ensures that there are no leaks in the piping or fittings. The US rules say that “the inspector is not required to use technically thorough methods.” The inspector does not use these ways to figure out if shower pans or enclosures are safe or watertight.” So, it is necessary to block the shower drain to check the shower pan’s integrity. You need to fill the shower up with water and wait at least 24 hours to check if the water level goes down. This means the inspector must return to the house and trust the seller to not mess with the test.
Sadly, this just doesn’t work in most situations. Also, the leak may be so minor that it takes 48 to 72 hours to notice the water level decline. For the sealing property test, you have to take off the drain cover and use an inflatable plug to stop the drain. There are various ways to stop or cover the shower drain, but they don’t work as well as a plug. A “Shower Pan Tester” can stop the drain, but it doesn’t seal very well on a tiled bathroom floor.
5- Anti-Overflow Performance
Shower drains allow water to drain from the basin or tub. A cap protecting a screen with openings or holes allows water to drain from the shower. This allows water out of the tub but traps hair and other debris that could get in the drain. If you keep running the shower even after stopping the drain. The water will ultimately overflow into the bath. The majority of showers feature an overflow pipe to avoid this situation. Also, the drain’s anti-overflow function is very important to meet national standards. It is an important part of any good-quality shower drain.
It’s vital to have anti-overflow performance. Because it stops water from collecting in the shower. So, this test is very crucial. Anti-overflow feature drains are essential for any bathtub or shower. These drains help stop floods and water damage, and they also make taking a bath or shower a little bit safer. They are very important for keeping toilets clean, dry, and pleasant. When remodeling a bathroom, professionals recommend installing anti-overflow drains to maximize use.
6- Drainage Discharge
If you want a Large shower with rain around, the choice of good drainage discharge is very important. If you don’t want your bathroom to flood, you’ll need to choose a shower drain with enough space for water to flow out. The NF standard (EN1253) demands a minimum of 24 l/min for a tube outlet D. 32 mm, with a supply (at the valve’s outlet) of 12 l/min. Also, the NF standard calls for a flow rate of 36 l/min for a tube outlet with a diameter of 40 mm. The flow rate of 48 l/min for a tube outlet with a diameter of 50 mm.
Also, you must clean the shower drain to remove hair, dead skin, and soap buildup to prevent clogging. This ensures that the drainage system will work well for a long time. You should make sure your shower drain has enough room for water to flow out. The 31 l/min flow rate of Yzdrain products is ideal for this purpose. Drainage discharge drain testing is also known as a “water test” or “drop test.” It works by putting a plug in the drain hole and filling the pipe with water. Throughout the test, the water levels will be tracked to ensure consistency.
Conclusion
Shower drains prevent water from leaking into the floor. They prevent water damage and keep any extra water away from the central drain. If you don’t already have a good quality shower drain, you should get one. You should think about getting one so you can sleep well, knowing your house is safe. But, it’s important to test the leakage and sealing of the shower drains and main lines. These quality tests should match the BS-EN-752:2008 US national guidelines. This article highlighted important national shower drain product quality assurance testing measures. We hope this information will be helpful for you.
